An HS code tariff lookup for the US takes four passes: expand the 6-digit HS code to a 10-digit HTS line, read the base rate on the 8-digit line, add every Chapter 99 line that matches the country of origin, then add the entry fees (MPF on every formal entry, HMF on ocean freight only). Skip any pass and the number you get is a partial tariff, not the duty you will actually pay.
Most "HS code tariff" searches return a single percentage. For goods made in China in late 2026, a single percentage is almost never the full answer. Below is the lookup sequence we run on every product, with a power-supply example you can recompute line by line.
Pass 1: expand the HS code to a 10-digit HTS line
The six HS digits are shared worldwide. The US adds two digits for the tariff line and two for statistics. The International Trade Administration's HS code explainer states it directly: "Expanding from the Harmonized System's 6-digit level, the United States requires a 10-digit number."
Example: HS 8504.40 is "Static converters" in the HTS. Under it, the US splits by use:
| 8-digit line | HTS text | General rate |
|---|---|---|
| 8504.40.40 | Speed drive controllers for electric motors | Free |
| 8504.40.60 | Suitable for physical incorporation into automatic data processing machines of heading 8471 | Free |
| 8504.40.70 | Other (the sibling line next to 8504.40.60) | Free |
| 8504.40.85 | For telecommunication apparatus | Free |
| 8504.40.95 | Other | Free |
Every 8-digit line here shows Free in Column 1 General. If you stopped the lookup now, you would conclude a Chinese power adapter enters duty-free. On a $10,000 shipment, that conclusion is off by $3,750.00. For a deeper walk-through of the digit structure, see HS code vs HTS code.
For our example we use the statistical line 8504.40.95.50.
Pass 2: read the three rate columns correctly
The HTS shows three rate columns on each 8-digit line:
- Column 1 General. The normal-trade-relations rate. China-origin goods use this column.
- Column 1 Special. Preference programs and free trade agreements, shown as a rate followed by program codes. These apply only when the origin country and the program both qualify.
- Column 2. A higher statutory rate for a short list of countries.
For China-origin goods, Column 1 General is your base. For 8504.40.95, that is Free. For 6109.10.00 cotton T-shirts, it is 16.5%.
Pass 3: run the line through Chapter 99
Chapter 99 is where the US places temporary and remedial tariffs. Each 9903 heading names a country, a list of subheadings, and a rate written as "The duty provided in the applicable subheading + X%". A China-origin product can match several of these at once.
Here are the 9903 lines that matter most for China sourcing in the current schedule, HTS 2026 Revision 23:
| 9903 heading | Program | HTS rate text | Scope |
|---|---|---|---|
| 9903.88.03 | Section 301, List 3 | + 25% | China, subheadings in US note 20(f) |
| 9903.88.15 | Section 301, List 4A | + 7.5% | China, subheadings in US note 20(s) |
| 9903.91.01 | Section 301, 2024 expansion | + 25% | China, US note 31(b), entries on or after September 27, 2024 |
| 9903.05.31 | Section 301, forced-labor action | + 12.5% | China, US note 52, from 2026-07-24 |
| 9903.05.43 | Section 301, forced-labor action | + 12.5% | Hong Kong, US note 52 |
| 9903.76.03 | Section 232, wood products | + 25% | Completed kitchen cabinets and vanities and parts, US note 37(f) |
| 9903.82.02 | Section 232, metals | + 50% | Aluminum, steel, copper and derivatives, US note 16 |
Two rules from the notes shape the lookup:
- The forced-labor layer stacks on top of other Chapter 99 duties. US note 52(a) says products subject to these headings "shall also be subject to any additional duty provided for in this subchapter or in subchapter IV of chapter 99," except as the note provides.
- Section 232 goods are carved out of the forced-labor layer. Heading 9903.05.90 covers articles of aluminum, steel or copper, wood products and the other 232 categories, and it sets their rate to "The duty provided in the applicable subheading". These goods do not take 9903.05.31.
For our 8504.40.95.50 example: 8504.40.95 appears in the List 3 subheading list in note 20(f), so 9903.88.03 applies at 25%. The forced-labor heading 9903.05.31 applies at 12.5%, subject to the forced-labor exemption check against the note 52 exemption list.
Pass 4: add MPF and HMF
Two user fees ride on almost every formal entry:
- Merchandise Processing Fee (MPF). 19 CFR 24.23 sets an "ad valorem fee of 0.3464 percent". For fiscal year 2027 (from 2026-10-01), CBP's inflation adjustment in 91 FR 48398 sets a floor of $34.58 and a cap of $670.86 per formal entry.
- Harbor Maintenance Fee (HMF). 19 CFR 24.24 sets a "port use fee of 0.125 percent (.00125) of its value". It applies to ocean shipments only, with no floor and no cap.
Our MPF and HMF calculator handles the floor, cap and fiscal-year switch for you.
The full lookup, worked out
Shipment: 8504.40.95.50, country of origin China, entered value $10,000, ocean freight, formal entry.
| Step | Line | Rate | Calculation | Amount |
|---|---|---|---|---|
| 1 | Base, 8504.40.95 | Free | 0% × $10,000 | $0.00 |
| 2 | 9903.88.03, List 3 | 25% | 25% × $10,000 | $2,500.00 |
| 3 | 9903.05.31, forced-labor 301 | 12.5% | 12.5% × $10,000 | $1,250.00 |
| Total duty | 37.5% effective | $3,750.00 | ||
| 4 | MPF | 0.3464% | $34.64, above the $34.58 floor | $34.64 |
| 5 | HMF | 0.125% | 0.125% × $10,000 | $12.50 |
| Landed (value + duty + fees) | $13,797.14 |
Line 3 is subject to the forced-labor exemption check. The base rate said Free. The actual duty is $3,750.00, plus $47.14 in fees.
What the lookup is based on: customs value
Every percentage above is applied to the US customs value, and that value excludes international freight and insurance. 19 CFR 152.102(f) defines the price actually paid or payable as "exclusive of any charges, costs, or expenses incurred for transportation, insurance, and related services incident to the international shipment."
Practically: if your supplier quotes CIF Los Angeles, back out the ocean freight and insurance before you multiply. If they quote FOB Ningbo, the FOB price is usually your starting point.
Don't forget the AD/CVD pass
Antidumping and countervailing duties are not printed in the HTS. They are company-specific cash deposit rates set by the Department of Commerce, collected by CBP. The forced-labor note confirms they apply on top: products under note 52 "shall continue to be subject to antidumping, countervailing or other duties."
If your product is near a known order, for example wooden cabinets and vanities from China under A-570-106, the deposit rate depends on the exact exporter. The current rate for The Ancientree Cabinet Co., Ltd. is 7.67%; the China-wide entity rate is 251.64%. Start at our AD/CVD hub and read why the supplier's exact name decides the rate.
Lookup checklist
| Check | Where to find it | Typical miss |
|---|---|---|
| 10-digit HTS line | hts.usitc.gov | Using the supplier's export code |
| Base rate | Column 1 General on the 8-digit line | Reading Column 2 by mistake |
| Section 301 lists | 9903.88 and 9903.91 headings and US note 20 and 31 | Checking only one list |
| Forced-labor 301 | 9903.05.31 and US note 52 | Missing the 232 carve-out in 9903.05.90 |
| Section 232 | 9903.76 and 9903.82 headings | Missing the 15 percent metal-weight rule in note 16(c) |
| AD/CVD | Commerce case and CBP messages | Matching by HTS code instead of scope text |
| MPF and HMF | 19 CFR 24.23 and 24.24 | Wrong fiscal-year floor, HMF on air freight |
FAQ
Can I look up a US tariff with just a 6-digit HS code?
You can find the heading and a range of possible base rates, but not the exact duty. The base rate sits on the 8-digit line, and Chapter 99 lines and exemptions can depend on 8 or 10 digits. Treat 6 digits as the starting point of the lookup.
Why does my HS code show "Free" when my broker charged duty?
"Free" is the Column 1 General base rate only. For China-origin goods, Section 301 and other Chapter 99 lines often apply on top. Our 8504.40.95.50 example goes from Free to $3,750.00 on $10,000 of goods.
Do Section 301 and the forced-labor tariff stack?
Yes, per US note 52(a) the forced-labor headings apply in addition to other subchapter III and IV duties, unless an exception in the note applies. Section 232 articles covered by 9903.05.90 do not take the forced-labor layer. See how the layers stack in 2026.
Which HTS revision should a lookup use?
The one in force on your entry date. The current revision is HTS 2026 Revision 23, published by the USITC on 2026-11-10. The changelog shows which revision our tools are running.
Ready to run your own code? Paste your HS or HTS code into our calculator and get every line above, from base rate to HMF, in one table you can hand to your broker.